Product Specifications
Product Model: M6R-FLP
Product Outer Diameter: 200mm
Product Color: Green
Product Height: 293mm
Package Includes
Filter Element x1, User Manual x1
Mijia Air Purifier Filter Formaldehyde Enhanced Version S1
*It is recommended to replace the filter element every 3-6 months
*Applicable Models
Xiaomi Air Purifier 2, Xiaomi Air Purifier 2S, Xiaomi Air Purifier 3, Mijia Air Purifier PRO
*Lower wind resistance, more activated carbon, and comprehensive upgrade of formaldehyde purification capacity
The integrated filter element structure effectively reduces wind resistance, and the good air permeability allows the purifier boost system to perform better and achieve better purification effect.
The optimization of the structure and the improvement of the space also allow the enhanced version of formaldehyde removal S1 to be equipped with more activated carbon, and the formaldehyde CADR is increased by 66% compared with the standard filter element*.
Formaldehyde CCM grade reaches F4*
*Strong catalytic activated carbon formula, two-step formaldehyde removal, restore clean air
High-efficiency low-formaldehyde technology firmly adsorbs formaldehyde on underground factors, and harmful molecules are difficult to desorb. On the basis of the traditional active super adsorption capacity of formaldehyde, a catalyst formula is added to the strong catalyst activated carbon formula, that is, a catalyst is added. During the purification process
, the catalyst can decompose formaldehyde into water and carbon dioxide. The substances produced after decomposition react with oxygen to form a catalyst, which circulates to promote the decomposition of harmful substances such as formaldehyde.
*Triple purification, efficient filtration of clean air
Polluted air
Primary filter - intercepts large suspended solids
High-quality filter material - filters inhalable particles
Catalytic activated carbon filter - adsorbs and decomposes harmful substances such as formaldehyde
Fresh air
*The primary filter intercepts large particles at 360 degrees
After the air enters the purifier, it first passes through the primary filter. It pre-treats the air, and the barrel-shaped structure can intercept and filter larger suspended matter such as dust, hair, and fine particles at 360 degrees.
*High-quality filter material filters inhalable particles
After removing large particles of impurities in the air, the second layer of high-quality filter material begins to process inhalable particles in the air. From PM2.5 to fine particles as small as 0.3μm, it can be effectively filtered and intercepted, and is widely used in medical equipment and professional laboratories.
*The meticulous creation of the folding mountain
The filter element filter is folded from a piece of high-quality filter material, which is about 1.8 square meters when fully unfolded. In order to minimize wind resistance, a lot of effort has been put into each folding corner. Through the powerful folding of precision machinery, each folding corner is made more consistent, allowing the air to flow more smoothly and quickly, reducing wind resistance.
*High-quality activated carbon intercepts and adsorbs harmful substances such as formaldehyde
The third-level catalytic activated carbon is the key to air purification. High-performance activated carbon is evenly filled into the mesh structure layer by layer, which increases the contact time and effective contact area between the gas and the activated carbon, and significantly improves the deodorization performance.
*The filter element can be used for up to half a year for a long time
The three-layer graded filtration not only improves the filtration performance, but also greatly increases the service life of the filter element. But over time, the performance of the filter element will gradually decline, or even fail, causing secondary pollution. It is recommended that the best time to replace the filter is about 3-6 months. Use the Mijia APP to check the filter usage and intelligently remind you to replace it in time.
