Processor
Tianwei 9200+
TSMC second-generation 4nm process
CPU: octa-core processor, maximum main frequency 3.35GHz
GPU: Immortalis-G715 MC11
Frame chip
Independent display chip X7
144FPS ultra-high frame rate
1.5K ultra-resolution
Memory and capacity
24GB + 1TB optional
Memory: 12GB/16GB/24GB
Storage: 256GB/512GB/1TB
LPDDR5x memory (up to 8533Mbps)
UFS4.0 flash memory (sequential read speed up to 4000MB/s)
Note: The actual available capacity will be reduced and vary due to many factors: Because the operating system occupies part of the memory (RAM), the actual available space is less than the marked memory capacity;
Because the installation of the operating system and pre-installed programs will occupy part of the flash memory (ROM), the actual available storage space is less than the marked flash memory capacity.
Physical dimensions
Height: 162.15 mm
Width: 75.7 mm
Thickness: 8.49 mm
Weight: 204 g
Note: The above data is Xiaomi laboratory test data. Actual results may vary slightly depending on industry measurement methods.
Screen and fingerprint
1.5K high brightness and high refresh rate
Size: 6.67 inches
Resolution: 2712*1220
Contrast: 5,000,000:1
Peak brightness: 2600nit
Display frame rate: up to 144Hz
Touch sampling rate: up to 480Hz
Ultra-high frequency PWM dimming: up to 2880Hz
12-bit color depth (68.7 billion colors) | DCI-P3 color gamut | Professional primary color screen | Ambient color temperature sensing | Sunlight screen | Classic eye protection | Paper eye protection | HDR10+ | HDR vivid | Dolby Vision |
Frame sharing ultra-high definition | High-frequency PWM dimming | Optical fingerprint under the screen | Dark light unlocking | Heart rate detection
Charging and battery
5000mAh (typical value)
Built-in lithium-ion polymer battery, non-removable
Xiaomi Pengpai P1 charging chip
Xiaomi Pengpai G1 self-developed power meter chip
120W wired fast charging
The phone supports PD2.0/PD3.0 fast charging protocol
USB Type-C double-sided charging interface
Standard 120W charger, compatible with PD charging protocol
Imaging system
Sony IMX800 large bottom camera
Sony main camera: 54MP/50MP (total/effective) sensor | OIS optical image stabilization | 1/1.49-inch sensor | 4in1 2.0μm fused pixel | 7P lens | f/1.7 aperture
8-megapixel ultra-wide-angle lens: 119° FOV
2-megapixel macro lens
Xiaomi Imaging Brain 2.0
EIS electronic image stabilization | Full link P3 | Everything Focus 2.0 | AI Capture | HDR 10+ | Film Camera | Film Frame | Cute Lens 4.0 | Ultra-clear Portrait Algorithm | Real-time Text Extraction | Document Mode 4.0 |
Movie Frame | Movie Filter | Voice-activated Photography | Exposure Feedback | Timed Continuous Shooting | Voice Subtitles | Live Photo | Micro Movie | AI Watermark | AI Camera | ID Card Copying Method
8K Video Shooting: 24FPS
4K Video Shooting: 30/60FPS
1080p Video Shooting: 30/60FPS
1080p Slow Motion Video Shooting: 120FPS/240FPS/960FPS
720p Video Shooting: 30FPS
720p Slow Motion Video Shooting: 120FPS/240FPS/960FPS
Front 20-megapixel HD Portrait Camera, Sony IMX596
Screen fill light｜Volume button countdown photo｜Super night scene｜Ultra wide angle panorama｜Voice control photography｜Timed continuous shooting｜Cute photo 4.0｜Micro film｜Time-lapse photography｜Voice subtitles｜Dynamic photo (livephoto)｜
AI watermark｜Portrait beautification｜Face recognition｜Video beautification｜Kaleidoscope｜Video label
1080p video shooting: 30FPS
720p video shooting: 30FPS
1080p slow motion video shooting: 120FPS
720p slow motion video shooting: 120FPS
Network and format
Dual card 5G | Full network 8.0
Support dual Nano-SIM card slots, no matter how the operator deploys the 5G network
Support dual card dual pass, dual card HD voice
Note: Whether 5G is supported depends on the local operator network;
Note: Dual card dual pass only supports 5G+5G, 5G+4G partial frequency band combinations. Actual usage depends on the operator's local network and service deployment.
Supported frequency bands
5G: n1/n3/n5/n8/n28a/n66/n38/n41/n77/n78
Note: Actual network and frequency band usage depends on local operator deployment; n28A (transmit: 703-733MHz, receive: 758-788MHz).
4G: FDD-LTE: B1/B3/B4/B5/B8/B18/B19/B26/B66
TDD-LTE: B34/B38/B39/B40/B41/B42
Note: LTE B41 (2496-2690 194MHz);
3G: WCDMA: B1/B4/B5/B6/B8/B19
2G: GSM: B3/B5/B8; CDMA 1X: BC0
Supports 4x4 MIMO antenna technology "HPUE" HORxD
Data connection
WLAN protocol: Wi-Fi 6, Wi-Fi 5, Wi-Fi 4 and 802.11a/b/g
WLAN frequency: 2.4G Wi-Fi | 5G wireless network
Supports 2x2 MIMO, Wi-Fi Direct, Miracast, 2.4G, 5G dual-channel concurrent
Bluetooth Bluetooth 5.4
Support: AAC/LDAC/LHDC 5.0/LC3/ASHA/Auracast
Navigation positioning
Beidou: B1I+B1C+B2a+B2b｜GPS: L1+L5｜Galileo: E1+E5a
GLONASS: G1｜QZSS: L1+L5｜NavIC｜A-GPS｜
Data network positioning | Wi-Fi network positioning | Sensor-assisted positioning
Video audio
Stereo dual speakers
MP3, FLAC, AAC, OGG, WAV, AMR, AWB
High-resolution audio certification | High-resolution wireless certification | Dolby Atmos
MP4, MKV, AVI, WMV, WEBM, 3GP, ASF playback
Support HDR10/10+ video
Sensor
Optical distance sensor | 360° front and rear dual light sensor | Acceleration sensor | Ambient color temperature sensor | Electronic compass | Gyroscope | Infrared remote control |
Flicker sensor | X-axis linear motor
NFC function
After activating NFC-related services in the wallet app, double-click the power button to use transportation cards, Mi Pay, door cards, car keys and other functions.
Mi Pay: supports online App payment, offline card payment, QR code payment, and UnionPay tag card payment. QR code payment supports UnionPay standard QR code main scan and scan code payment.
Door card: physical door card, smart door lock, community door card, customized blank card. (Only door cards with 13.56MHz frequency band, bank cards with door card function, stored value consumption, public transportation consumption, etc. can be simulated.
Even if the functional door card simulation is successful, these cards do not have bank, public transportation and other functions)
Car key: supports mobile phone NFC functions such as unlocking and starting the engine.
Operating system
Xiaomi UI 14
Packing list
Mobile phone host|Power adapter|USB Type-C data cable|Mobile phone protective case|Film (covered on the screen)|Pin|Instructions for use (including three-guarantee coupon)
